Product Details:
Payment & Shipping Terms:
|
Material: | Flameresistant Material | Input And Output: | Muitifunctional Input And Output |
---|---|---|---|
Size: | Small In Size And Light In Weight | Output Current: | 37A |
High And Low Temperature Aging: | High And Low Temperature Aging Test | Service: | Thorough And Satisfactory In Service |
High Light: | variable frequency controller,frequency inverter drive |
Speend Controller Single Phase Frequency Drive / Portable Frequency Inverter Motor
Nk1000 Series Frequency Inverter is the most popular product of Noker. It is high performance general purpose VFD drive, featuring portable mini size, modular design, low temperature rise, low noise and prominent performance. Based on its advanced design, JAC580B AC motor drive price low is well-known for its good quality, high torque, high precision, high reliability, and competitive price.
Specification
Item | Specifications | |
Standard functions | Input voltage range | Voltage transient fluctuation: -15% ~ +10% |
Input frequency | 50Hz/60Hz Fluctuation range: ±5% | |
Maximum frequency | 500Hz | |
Carrier frequency |
1KHz ~12KHz The carrier frequency is automatically adjusted based on the load features. |
|
Control mode |
Voltage/Frequency control (V/F) Sensorless flux vector control without PG card (SVC) Sensor speed flux vector control with PG card (VC) |
|
Start-up torque | 0.25Hz/150% SVC); 0.5Hz/150% (V/F); 0Hz/150% (VC) | |
Speed range | 1:100 (V/F); 1:200 (SVC); 1:1000 (VC) | |
Speed response | 5Hz (V/F); 20Hz (SVC); 50Hz (VC) | |
Speed control accuracy | ±0.5% (V/F); ±0.2% (SVC); ±0.02% (VC) | |
Torque control accuracy | ±10% (SVC) Below 5Hz, above 5Hz, ±5%; VC: 3% | |
w Standard functions |
Overload capacity |
G type: 60s for 150% of the rated current, P type: 60s for 120% of the rated current, |
V/F curve |
Straight-line V/F curve; Multi-point V/F curve; power function; V/F separation Torque boost support; Automatic torque boost(factory setting); manual torque boost |
|
DC bus voltage control |
Over-voltage stall control:Limit the power generation of the motor by adjusting the output frequency to avoid skipping the voltage fault; Under-voltage stall control: Control the power consumption of the motor by adjusting the output frequency to avoid yaw failure VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin Control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump under-voltage fault |
|
Keypad | LED Digital keyboard and LCD keyboard(option) | |
Communication | Standard: Modbus communication ; Option: Profibus-DP and CAN OPEN | |
PG card | Incremental Encoder Interface Card(Different output and open collector),Rotary transformer Card | |
Over-voltage/Over-current stall control | The current and voltage are limited automatically during the running process so as to avoid frequency tripping due to over-voltage/over-current. | |
Individualized functions | High performance | Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology. |
Torque control mode | Speed control and torque control mode, can realize the open-loop tension control. |
RUN | Running command source | Operation panel; control terminals; Serial communication pot. You can perform switchover between these sources in various ways. |
Frequency source | There are a total of 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. You can perform switchover between these sources in various ways. | |
Auxiliary Frequency source | There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis. | |
Input terminal |
Standard: 5 digital input(X) terminals, one of which supports up to 50KHz high-speed pulse input; 2 analog input(AI) terminals, supports 0 ~ 10V voltage input , 4 ~ 20mA current input. |
|
Output terminal |
Standard: 1high-speed pulse output terminal (open-collector) that supports 0 ~ 50KHz square wave signal output; 1 digital output (DO) terminal; 1 relay output terminal; 2 analog output (AO) terminal that supports 0 ~ 20mA current output or 0 ~ 10V voltage output. 2 relay output |
|
Display and operation on the operation panel | LED display | It displays the parameters. |
Key locking and function selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function. | |
Protection mode | Motor short-circuit detection at power-on, input/output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection , overheat protection and overload protection | |
Optional parts | LCD operation panel, braking unit | |
Environment | Installation location | Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt. |
Altitude | Lower than 1000m | |
Ambient temperature |
-10℃ to +40℃ (de-rated if the ambient temperature is between 40℃ and 50℃) |
|
Humidity | Less than 95% RH, without condensing | |
Vibration | Less than 5.9m/s2 (0.6g) | |
Storage temperature | -20℃ to +60℃ | |
IP level | IP20 | |
Pollution degree | PD2 | |
Power distribution system | TN, TT |
Operation panel
Shipment and Payment
Contact Person: Sales Manager