Noker Electric, your professional electrical partner !
Noker Electric, your professional electrical partner !
Product Details:
Payment & Shipping Terms:
|
| Communication: | Standard Modbus Communication Function | Closed Loop Control: | Voltage / Current / Power Feedback Type |
|---|---|---|---|
| Power Distribution: | On-line Power Distribution | True RMS Display: | True RMS Display (optional) |
| Display: | OLED Display | Power Frequency: | 50/60Hz |
| High Light: | voltage regulator module,thyristor diode module |
||
PS36F Series With On-line Power Allocation Function True RMS Value Display Three Phase Thyristor Power Regulator is widely used in industry control.
Features
1. Three phase thyristor regulator with light and dense mounting
2. Can select voltage feedback / current feedback / power feedback type when phase control mode is adopted .
3. A new type of fixed period zero crossing trigger) It can control the inductive load and the primary side of the transformer.
4. With the function of on-line power distribution. True RMS display (optional)
5. Standard Modbus communication function, can be equipped with PROFIBUS communication module
6. Four input signal type selection (DC 4-- 20mA,DC 1--5V,DC 0--5V,DC 0--10V) .
7. Rated current: 50A ,80A ,100A ,150A ,200A ,250A,300A,400A, 500A,800A,1000A ,1500A,2000A.
8. Rated voltage: AC 220V / AC380V
Specification
| Phase number | Three phase |
| Control mode | Phase control mode (phase shift trigger) |
| Zero position control mode (variable period zero crossing trigger) | |
| Feedback | No feedback, voltage feedback, current feedback, power feedback (when a feedback mode is specified for phase control) |
| Rated voltage | AC 220V/ AC 380V |
| Allowable voltage change | ±10% of Rated voltage |
| Rated frequency | 50/60Hz |
| Allowable frequency change | Rated frequency ±1Hz |
| Rated current | 30A,50A,80A,100A,150A,200A,250A,300A,400A,500A,600A,800A,1000A,1500A,2000A |
| Input Signal | DC 4--20mA input impedance: 120Ω |
| DC 1--5V input impedance: 10k Ω | |
| DC 0-- 5V input impedance: 10k Ω | |
| DC 0--10V input impedance: 10k Ω | |
| Output Range | No feedback, 0-- 98% output range of rated voltage |
| Voltage feedback, 0-- 98% output range of rated voltage | |
| Current feedback, 0-- 100% output range of rated voltage | |
| Power feedback, 0-- 98% output range of rated voltage*0-- 100% output range of rated current | |
| Output Precision | No feedback, rated voltage±10% |
| Voltage feedback, rated voltage±3% | |
| Current feedback, rated voltage±3% | |
| Power feedback, rated power±3% | |
| Load Type | Resistive load (phase shift trigger, Variable period zero crossing trigger) |
| Inductive load (phase shift trigger) | |
| Minimum load current | 0.5A above (98% output of rated voltage) |
| Other function | Soft start, soft off(0--60S),Operation stop switch, external setters (slope, base point, manual, etc.) overcurrent protection, overvoltage protection, current limit, voltage limit |
| Alarm action | 1. Overcurrent alarm: ALM alarm light, alarm parameters display, alarm contact output |
| 2. Overvoltage alarm: ALM alarm light, alarm parameters display, alarm contact output | |
| 3. Load breakage alarm Alm alarm lamp on, alarm parameters display, alarm contact output | |
| 4. Radiator overtemperature alarm: Alm alarm light on, alarm parameter display, alarm contact output | |
| Alarm output number | One point |
| Alarm contact capacity | AC250V 3A |
| Cooling mode | Rated current 30A (including 30A) below self-cooling |
| Rated current 50 A (including 50 A) above air cooling | |
| Output setting range | Slope setting (internal), 0～100% of output range |
| Operating ambient temperature | -10℃--55℃ |
| Operating environment humidity | 30%RH--90%RH |
| Insulation impedance | DC 500V,20MΩ |
| Insulation strength | AC 2000V/min |
| Materials and Coatings | Plate / spray coating |
| Communication protocol | Modbus RTU |
| Communication interface | RS485 |
| Baud rate | 4800bps 9600bps 19200bps |
| Setting item | 1. Run (run / stop) output mode (automatic / manual) |
| 2. Control mode (phase control / zero control) | |
| 3. Feedback type (no feedback / voltage feedback / current feedback / power feedback) | |
| 4. Manual output value (0 / 100%) slope setting (0 / 100%) | |
| 5. Current limit value (0 ~ 100% rated current) voltage limit value (0 ~ 100% rated voltage) | |
| 6. Over-current protection (on / off) overcurrent protection value (1.2 times rated current) | |
| 7. Over-voltage protection (on / off) overvoltage protection value (1.2 times rated voltage) | |
| 8. Soft start time (0 ~ 60s) soft turn-off time (0 ~ 60s) | |
| 9. Load off alarm (on / off) | |
| 10. Communication address, communication rate, communication parity check, host computer control (on / off) | |
| 11. Fixed period zero crossing control feedback (on / off) | |
| Display item | Voltage value, current value, power value, load impedance value, input signal percentage, alarm code, various set values, various states |
| Digital Display | OLED display (display resolution 128 × 64) measurement value, set value, alarm value, etc. |
| Status Display | 4 LED status lights (red, green) running state, manual state, stop state, alarm state |
Dimension
Shipment and Packaging
Contact Person: Sales Manager
