Product Details:
Payment & Shipping Terms:
|
Communication: | Modbus RTU | Convenient: | Keypad Outgoing |
---|---|---|---|
Customization: | Customization Is Available | Current Transformer: | Built-in Current Transformer |
Parameter Password: | With Parameter Password | CPU: | M3 Core CPU |
High Light: | scr soft starter,thyristor soft starter,3 phase soft starter |
High Performance Three Phase Motor Electronic Soft Starter Limiting Start Current
Intelligent motor soft starter, the use of intelligent digital control; With the single chip processor as the intelligence center, thyristor module for actuators for full automatic control motor. It applies various squirrel-cage asynchronous motor control of load, the motor can smooth starting under any working conditions, protect the drag system, reduce the starting current impact on power grid, ensure reliable motor starting. Smoothly soft stopping function can effectively solve the inertial system surge problem, eliminate the drag system of inertial impact, that is traditional equipment cannot be achieved. Intelligent digital motor soft start equipment system with the complete protection function, extend the service life of the system, reduce the cost of system cost, improve the reliability of system and compatible with all the functions of starting equipment; It is a new ideal alternative for traditional star triangle starter and self-coupling decompression starter.
Features
Reliable quality
1. The computer simulation design.
2. SMT production process.
3. Good EMC performance.
4. The machine before delivery on the high temperature aging, vibration test.
Perfect and reliable system protection function
1. Protection of no voltage, less voltage and over voltage.
2. Protection of overheating and starting time too long.
3. Protection of Input phase lost, output phase lost and 3phase unbalance.
4. Protection of starting over current, running overload, and load short circuit protection.
Maintenance function
1. Fault self-diagnosis (short circuit, over voltage, less voltage, one phase grounded, motor overload, one phase lost, motor blocked, and intelligent software can inspect drag system working state).
2. Combination of modular design, according to the fault display content, quick troubleshooting.
Independent intellectual property products
Conditions Of Usage
Item | Description |
Power supply | AC220V/380V/660V±15% |
Power frequency | 50/60Hz |
Adaptive Motor | Squirrel-cage three-phase asynchronous motor |
Starting times | It is recommended not to exceed 20 times per hour |
Control mode |
1) Operation panel control; 4) External control+ COM control ; 7) COM control ; |
Start Mode |
1) Current-limiting start; 4) Torque control +voltage ramp to start; |
Stop Mode | 1) Soft stop; 2) Free stop; |
Protective Function |
1) Open loop protection for external instantaneous stop terminals; 2) Over-heat protection for soft starter; 4) Input open phase protection; 7) Starting over current protection; 10) Overvoltage protection for power voltage; 13) Auto restart or incorrect wiring protection; |
Protection Class | IP00,IP20 |
Cooling Pattern | Natural wind cooling |
Place to be used | Indoor location with good ventilation free from corrosive gas and conductive dust. |
Environment Condition | Below 2000M. Rise the rate power when the altitude is more than 2000M. Ambient Temperature -25+45°C Ambient Humidity 95%(20°C±5°C) Vibration<0.5G |
Connection Diagram
Dimension
Maintenance
1. Dust: If too much dust, it will reduce the insulation level of the soft starter, even causes the soft starter does not work.
Brush the dust with clean and dry brush.
Remove dust with compressed air machine.
2. Condensation: If condensation, it will reduce the insulation level of soft starter, even causes the soft starter does not work.
(1) Blow it with a hair dryer or electric stove.
(2) Bring it to power distribution room for dehumidification.
3. Regularly check components' intact. Whether it can work properly.
4. Check soft starter' cooling channel, ensure they are not clogged by dirt and dust.
Before maintenance checking, it has to cut off all power in the line side of soft starter.
Contact Person: Sales Manager