Payment & Shipping Terms:
|Protection:||Perfect Motor Protection||Convenient:||Keypad Outgoing|
|Customization:||Customization Is Available||Display:||LED Display|
|Communication:||Optional Modbus Communication||Frequency:||50/60Hz|
scr soft starter,
3 phase soft starter
CE Certification AC220-380V 50/60Hz 160KW Three Phase With Perfect Electric Motor Protection Thyristor Soft Starter is a new type of starting equipment which is designed and produced by using power electronics technology, micro-processing technology and modern control theory. The product can effectively limit the starting current of AC asynchronous motor when starting, and can be widely used in fan, water pump, transportation and compressor, etc. It is a traditional star / triangle conversion, self-decoupling voltage reduction, etc. Ideal replacement products for Magnetic-Controlled Stepdown Equipments.
Conditions Of Usage
|Power Supply||Input Voltage||Three-phase 220V/380V/480V/660V AC±15%|
|Adaptive Motor||Squirrel-cage three-phase asynchronous motor|
|Starting Times||It is recommended not to exceed 20 times per hour|
|Start Mode||(1) Current-limiting start|
|(2) Voltage ramp start|
|(3) Kick start+ current-limiting start|
|(4) Kick start + voltage ramp start|
|(5) Current ramp start|
|(6) Voltage current-limiting double closed-loop start|
|Stop Mode||(1) Soft stop|
|(2) Free stop|
|Protective Function||(1)Open loop protection for external instantaneous stop terminals|
|(2) Over-heat protection for soft starter|
|(3) Protection for too long starting time|
|(4) Input lose phase protection|
|(5) Output lose phase protection|
|(6) Unbalanced three-phase protection|
|(7) Running over current protection|
|(8) Running overload protection|
|(9) Protection for fault parameter setting|
|(10) Incorrect wiring protection of external control stop terminals|
|Ambient||Indoor with good ventilation and free from corrosive gas and conductive dust|
|Altitude||Below 1000m. Need to rise the rated power when the altitude is more than 1000m|
|Humidity||90%RH without dew condensation|
|Protection Class||IP 20|
1. In terms of performance and quality, it has reached the level comparable to imported advanced brands.
2. Upgrading of common domestic soft starters and the ideal alternative to imported products.
3. The functions and performance indicators have been carefully designed and tested.
4. Parameters are easy to set up and easy to debug.
5. The best starting performance can be guaranteed under any conditions.
6. Intelligent motor soft starter function
7. Iintelligent motor protector function
8. Programmable relay output function
9. Programmable timing output function
10. Programmable state indicator
11. Digital ammeter, voltmeter, power meter function
12. Fault information storage function
13. Starting time memory and statistical function of starting times
14. Operation status memory, power failure and automatic recovery after calling.
15. 4-20mA real time current output function
16. Built-in RS232/485 communication interface
17. Start delay (0-999S), starting interval delay (0-999S), programmable output delay (0-999S)
1. Dust: If too much dust, it will reduce the insulation level of the soft starter, even causes the soft starter does not work.
Brush the dust with clean and dry brush.
Remove dust with compressed air machine.
2. Condensation: If condensation, it will reduce the insulation level of soft starter, even causes the soft starter does not work.
(1) Blow it with a hair dryer or electric stove.
(2) Bring it to power distribution room for dehumidification.
3. Regularly check components' intact. Whether it can work properly.
4. Check soft starter' cooling channel, ensure they are not clogged by dirt and dust.
Before maintenance checking, it has to cut off all power in the line side of soft starter.
Contact Person: Sales Manager