CK70 Built-In Bypass Soft Starter Use DSP Central Processing Unit
Built-In Bypass Soft Starter Overview
CK70 series intelligent soft starter with built-in bypass is a brand-new product optimized and launched on the basis of our CK60 economic soft starter.
Based on the CK60 economic soft starter, the CK70 series is a brand-new product optimized and launched, and its overall performance has been greatly improved to become the preferred product for high-performance drive control of general machinery.
It has become the preferred product for high-performance drive control of general-purpose machinery. The product adopts today's international advanced level of power electronics technology and microprocessor
power electronics technology and microprocessor technology, and adopts high-performance DSP as the central processor to ensure the real-time, superior
It adopts high performance DSP as the central processor to ensure the real-time, superiority and safety of the machine control system. CK70 soft starter is not only suitable for fans, pumps, but also for conveyors.
CK70 soft starter is not only suitable for fans and pumps, but also suitable for conveyor belts, compressors, crushers and other occasions with heavy load and fast response.
CK70 soft starter is not only suitable for fans and pumps, but also suitable for conveyor belt, compressor, crusher and other occasions with heavy load and fast response.
Built-In Bypass Soft Starter Specifications
| ITEM |
Project Description |
| Applicable standards |
GB14048.6-2016(IEC947-4-2) |
| Applicable motor type |
Squirrel-cage three-phase asynchronous motors |
| Motor power |
11A……1260A(5.5~630kW) |
| importation |
Control Voltage |
AC220V±15%;50Hz/60Hz;AC110V±15% |
| Rated Voltage |
AC380V±15%;50Hz/60Hz;660V±15% |
| Adjustable start time |
1～120s adjustable |
| Adjustable stopping time |
0～120s adjustable |
| control mode |
1.Ramp voltage 2.Ramp current 3.Current limit mode |
| I/0 |
Logic Inputs |
3 channels (X1~X3) |
| Analog Outputs |
1 channel 4~20mA/0~10V |
| Relay Output |
2 relay outputs |
| Run the command by typing |
Keyboard display unit setting, control terminal setting |
| RS485 communication given. |
| Communication |
Integrated communication protocols |
Standard Modbus protocol, 1 channel |
| Display Unit |
LCD display |
Can display current, voltage, alarm and other motor parameters |
| Protection and monitoring |
Short-circuit, over-voltage, overload, under-voltage, phase loss, over-current, temperature protection |
| |
|
Indoor, free from direct sunlight, dust, corrosive, flammable gases, oil mist, water vapor, dripping water or salt. |
| matrix |
Location |
Water vapor, dripping water or salt, etc. |
| |
| |
| altitude |
Altitude more than 1000m, the capacity should be reduced accordingly, every increase of 100m, the current is reduced by 0.5%. |
| environmental temperature |
-10℃~+40℃. |
| Above 40℃ shall be used with reduced capacity |
| For every increase of 1℃, the current shall be reduced by 2%. |
| Temperature |
Less than 95%RH, no water droplet condensation. |
| Vibration |
Less than 5.9m/s2(0.6g) |
| Storage Temperature |
-40℃~70℃ |
| framework |
Protection class |
Ip20 |
| Cooling method |
Radiator, natural cooling |
| Installation |
Vertical installation in cabinet |
Operating environment
The altitude of the installation place is not more than 1000m above sea level; if it is more than 1000m above sea level, it should be used with reduced capacity;
The ambient temperature is -10～40℃, above 40℃, the capacity should be reduced, and the current should be reduced by 2% for every exceeding 1℃.
Ambient humidity ≤95%RH, no water condensation;
●Indoor without corrosive gas that destroys metal and insulating materials;
●No direct sunlight, no dust, flammable gas, oil mist, dripping water or salt.
一: How to order ?
A: Step 1, please tell us model name or link and quantity you need;Step
2, then we will make a PI for you to confirm the order details;Step
3, when we confirmed everything, can arrange the payment;Step
4, finally we deliver the goods within the scheduled time.
二. Q: When will make delivery ?
A: Delivery time-Sample order: 1-3 days after receipt of the full payment.-Stock order: 3-7 days after receipt of the full payment.-OEM order: 12-20 days after receipt of the deposit.
三,.After-sales Service1 year warranty for all kinds of Inverter:If you find any defective accessories after receiving the goods, please contact us at once. we will give youthe new parts forfree to replace in the next order after confirmation, as an experienced manufacturer, you can rest assured ofthe quality andafter-sales service.(Please refuse to sign if the goods package in broken situation )
四. What services can we provide?Accepted Delivery Terms:
FOB,CFR,ClF,EXW,CIP,FCA,Express Delivery ;Accepted Payment Currency:USD,EUR,CAD,AUD,HKD,GBP,CNY;Accepted Payment Type: T/T,L/C,PayPal,Western Union,Cash,Escrow;Transportation: DHL, UPS,EMS, FedEx, TNT, Air freight, Sea freight, Train way
